Quest PA User Manual
Rear panel
Powering up
Your new QUEST portable PA unit may arrive with you with the internal battery charged.
Before connecting to the mains, turn down all volume controls and switch the unit on (25) and
see if the power LED lights. If not, you will need to charge the battery before use away from
mains power. Connect the QUEST unit to the mains using the appropriate IEC power lead
supplied (26).
When not in use but connected to the mains, if the POWER switch is in the OFF position, the
internal battery will be re-charged from the mains supply, indicated by charging and battery
status LEDs (11).
You may otherwise opt to connect the DC input at the rear (12) to an external 12-15Vdc
supply (e.g car battery) or use the internal battery if charged.
1
Media player display
2
Media player controls
3
Instrument input volume
4
Echo effect level
5
Mic 1+2 inputs volume
6
Instrument input 6.3mm jack
7
Microphone 1 input 6.3mm jack
8
Microphone 2 input 6.3mm jack
9
VHF Mic A volume
10 VHF Mic B volume
11 Battery charge status LEDs
12 12Vdc power input
13 VHF antennas
14 Cooling fan vent
15 SD/MMC card slot
16 Media player volume
17 USB port
18 Main output volume
19 Treble EQ boost/cut
20 Bass EQ boost/cut
21 Line out L+R RCA
22 Line in L+R RCA
23 Line in 3.5mm stereo jack
24 TALKOVER button
25 Power switch & indicator LED
26 IEC mains inlet & fuse holder