Qtx QTFX-V1, Руководство пользователя, Страница: 7 / 8

160.456UK User Manual
General maintenance
To maintain optimum performance and minimize wear, the item should be cleaned frequently.
Usage and environment are contributing factors in determining frequency.
As a general rule, fixtures should be cleaned after use to avoid dust build-up and blockages,
which can result in poor performances, overheating and breakages.
Be sure to power off the fixture before conducting maintenance.
Unplug fixture from power. Use a vacuum or air compressor and a soft brush to remove dust
collected on external vents and internal components. Clean the external case when the fixture
is cold with a dry cloth or tissue, and drag dirt and grime to the outside case.
To ensure a continuing high performance it is recommended to use water or smoke cleaning
fluid (160.670) to clean the internal workings. Simply empty the tank of any smoke fluid, fill
with water or smoke cleaning fluid then operate two full cycles to clean the internal pipes. This
should be done every 2 months to ensure reliable performance.
Specifications
Troubleshooting
Warning: Hot components! ... Switch off and allow to cool before touching the unit.
No light on mains switch
Check mains voltage is correct and socket is switched on
Check IEC lead is OK and connected properly
Check mains fuse and fuse in plug top
If fuse blowing repeatedly, refer to qualified service personnel
No RF control
Check pairing of wireless fob to fog machine
Check wireless fob battery
Remote light is on but no fog
output
Check fog fluid level (Fluid Low indicator)
If fluid is OK and pump working, the lines may be blocked
Check that nozzle is not blocked or obstructed
If blocked, clean with fog machine cleaner & distilled water
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2014. AVSL Group Ltd.
Power supply 230Vac, 50Hz (IEC)
Power 1300W
Reheat time 4 min (approx.)
Fog output (approx.) 20,000 Cu Ft (283m³) / min
Tank capacity 2.5l
Remote control frequency 433MHz
Dimensions 341 x 345 x 194mm
Weight 7.8kg