160.560UK User Manual
MOUNTING INSTRUCTIONS:
The fixture may be mounted in any position provided there is adequate room for
ventilation and the fluid can not leak.
It is important never to obstruct the front of the machine, fan or vents pathway.
Mount the fixture using a secure clamp.
Adjust the angle of the fixture loosening both knobs and tilting the fixture. After
finding desired position, re-tighten both knobs.
When selecting installation location, take into consideration refilling the tank and
routine maintenance. Safety cables must always be used when installed at a height.
Never mount in places where the fixture will be exposed to rain, high humidity,
extreme temperatures changes or restricted ventilation.
CAUTION! TO PREVENT MORTAL ELECTRICAL RISK AND LONG LIFE OPERATION:
For your safety, please kindly pay attention to all of the warnings listed below:
Always plug in the power plug last and disconnect from the mains when the
device is not in use or before cleaning.
Do not install and operate the device in rain or extreme heat, moisture or
dusty environments.
This device is for indoor use only and in a dry environment.
Do not switch on immediately but wait until it reaches to room temperature if
the device has been exposed to drastic temperature fluctuations.
Do not shake the device and avoid brute force when installing or operating.
Do not use the device during thunderstorms and please disconnect the power.
Do not use solvents or aggressive detergent to clean the device. Use a soft
and clean cloth.
Do not modify the device or the connected power cord without authorization.
Use appropriate safety-rope for safety.
Clean the machine regularly using warm water
