151.557UK User Manual
Specifications
Power
110-240Vac, 50/60Hz (IEC)
Power consumption
130W
Fuse rating
T3.15A
LED type
4 x 30W RGBW COB LED and 4 x
1W white LED
Beam angle
14-36°
DMX channels
3, 6 or 28
Height adjustment
1.5 - 2.5m
Dimensions : PAR bar
1023 x 215 x 71mm
Weight
11.2kg
LED safety standard
BSEN62471:2008
Troubleshooting
No power (mains)
Check mains voltage is correct and outlet is switched on
Check IEC lead and fuse (if fuse continually blows, refer to your
dealer)
No light output
Check control panel mode settings (standby, slave, sensitivity, DMX)
Check DMX settings from controller (dimmer levels, blackout etc.)
Check foot control ensure unit not in black out mode
No strobe output
Check strobe settings on control panel or from DMX controller
Check Mic sensitivity is not set to minimum
Unresponsive to DMX
Check DMX connection and leads
Check that unit is in DMX mode and ensure DMX address remains lit
to confirm receiving DMX signal
Check DMX controller is not set to black out
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Overheating/
cutting out
Check that the unit is not too close to a heat source
Foot control not
working
Check wireless function is enabled on the light unit
Check control has battery inserted and battery is not flat
Check antennas on both light unit and control are lifted
Check the unit and control is not located next to wireless router as
interference may occur
