FF00
FF00-FF99
Colour jump setting (speed slow to fast)
EE00
EE00-EE99
Colour fade setting (speed slow to fast)
CC00
CC00-CC99
Colour pulse setting (speed slow to fast)
F000
F000-F255
Strobe setting (speed slow to fast)
SOUD
SOUD
Sound to light white strobe setting
SUND
SUND
Sound to light colour change setting
r000
r000-r255
Red dimming (0-100%)
G000
G000-G255
Green dimming (0-100%)
b000
b000-B255
Blue dimming (0-100%)
Remote control:
The PAR100 is supplied with an I.R. remote control for quick access to most of the basic functions of the
unit. This must be aimed at the front of the unit where there is a remote receiver and has a maximum
range of approximately 4-5m. Controls and functions are listed on the diagram below:
DMX mode:
The PAR100 can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on
the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping
through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct
start address by using the
“
UP
”
and
“
DOWN
”
buttons and
“
ENTER
”
to confirm.
This unit has 7 DMX channels as indicated in the table below:
Channel
Value
Function
Setting
CH1
0-255
Master dimming (0-100%)
Available in all modes
CH2
0-255
Red dimming (0-100%)
CH3
0-255
Green dimming (0-100%)
Dimming modes only
CH4
0-255
Blue dimming (0-100%)
CH5
0-255
Strobe (speed slow to fast)
Available in all modes
CH6
0-50
Open CH1-CH5
51-100
Colour select
101-150
Colour jump setting
1.
Power = Remote on/off
2.
Auto = Colour jump open/off
3.
Mode = Colour fade open/off
4.
Flash = Strobe open/off
5.
-- = Decrease option setting
6.
R = Red open/off
7.
G = Green open/off
8.
Enter = Save option setting
9.
Music = Sound to light colour
change open/off
10.
Motor = Manual colour select
11.
+ = Increase option setting
12.
Dmx = DMX512 open/off
13.
B = Blue open/off
14.
W = No function on this model
(achieve white by opening red,
green and blue concurrently)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
