background image

 

www.avsl.com

                                                                                            154.030UK User Manual 

PAR100 

3in1 LED PAR Can 

Item ref: 151.030UK 

User Manual 

 

 

 

 

Thank you for choosing the PAR100, A lightweight and compact LED PAR Can fitted with 18 3-in-1 RGB 

LEDs. This unit can be controlled by auto, sound-to-light, master/slave programs or via DMX. A great 
value solution for background wash illumination. 

In the box: 

 

Your PAR100 should arrive with you in a single carton in good condition. The carton should contain  
1 x main unit with bracket and screws, 1x remote control, 1 x UK IEC mains lead and 1 x manual. 

 

 

Warning: 

 

To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event 
of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then 

check the unit before continuing use. 
 

 
 

 
 

 
 

Please read through this manual thoroughly before use, any damage  

Caused by misuse of product will not be covered by warranty.

 

Please do not open cover, contains high voltage. This 

product is not serviceable or repairable by the end user. 

Please refer to qualified personnel for service and repair. 

 
 

 
 

Содержание PAR100

Страница 1: ...1 x main unit with bracket and screws 1x remote control 1 x UK IEC mains lead and 1 x manual Warning To prevent risk of fire or electric shock do not expose the unit to rain or damp environments In the event of a spillage disconnect the mains and allow the unit to dry out naturally Qualified personnel should then check the unit before continuing use Please read through this manual thoroughly befor...

Страница 2: ...r debris build ups Do not use strong solvents for cleaning the unit Rear panel controls 1 Manual control buttons 2 DMX Signal in 3 DMX signal out 4 LED display 5 IEC power in fused 6 IEC power out Manual control menu Press the MENU button to enter the settings menu Press UP and DOWN buttons to navigate through various setting functions Press ENTER button to save the desired setting Menu Number ran...

Страница 3: ...R lead Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit To enter DMX mode select A001 from the menu and confirm the correct start address by using the UP and DOWN buttons and ENTER to confirm This unit has 7 DMX channels as indicated in the table below Channel Value Function Setting CH1 0 255 Master dimming 0 100 Available in all modes CH2 0 255 Re...

Страница 4: ... controller dimmer levels blackout etc Unresponsive to DMX Check that unit is in DMX mode and ensure DMX address remains lit to confirm receiving DMX signal Check DMX controller is not set to black out Check DMX controller is on correct fixture page Check master dimmer value Check correct DMX address is set Check DMX connection and leads Overheating cutting out Ensure adequate ventilation and unit...

Отзывы: