150.471UK User Manual
Laser safety function
The laser will only function when the laser safety key switch is turned to the “ON” position.
When in the “OFF” position, the HADRON will only use strobe and derby for all settings. The
remote socket below the key switch serves a similar function; the laser function will be
disabled when the two connections of this socket are connected. To restart the laser function,
the key switch needs to be turned off and on again.
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments.
In the event of a spillage, disconnect the mains and allow the unit to dry out naturally.
Qualified personnel should then check the unit before continuing use. Always check the
correct voltage and the condition of the IEC lead before connecting to a power outlet.
Always ensure any DMX leads used are in good condition with no short connections or
damaged plugs.
Warning
This item contains laser radiation, no user serviceable/repairable parts within.
Please refer to licensed electrician to perform any required repair or
maintenance. This product is strictly for professional use only. Approved
personnel required to install and operate the unit, strictly following the laser
health and safety guide HSG95.
For detailed information regarding HSG95, please see the below web link:
http://www.hse.gov.uk/pubns/books/hsg95.htm
This product is a class 3B laser, which means extreme care needs to be taken
when operating the device. This laser can cause permanent damage to
eyesight through misuse or misconduct. Please read through this manual
thoroughly before use.
