User Manual –LS01 Laser
152.738UK
8
7. Caution:
For your safety, please kindly pay attention to all of the warnings below:
Always plug in the power plug last and disconnect from the mains when
the device is not in use or before cleaning.
Do not install and operate the device in rain or extreme heat, moisture
or dusty environments.
This device is for indoor use only and in a dry environment.
Do not switch on immediately. Wait until the unit reaches room
temperature.
Do not shake the device and avoid brute force when installing or
operating
Do not use the device during thunderstorms and please disconnect the
power.
Do not use solvents or aggressive detergent to clean the device. Use a
soft and clean cloth.
Do not modify the device or the connected power cord without
authorization.
Do not stare into the aperture. This product emits hazardous levels of
optical radiation and will cause serious injury to the eyes if viewed at
close range.
This product should be securely mounted so that its output emission is
always directed away from people and at objects that are able to reflect
emission towards people. In this regard, the separation distances cited
in HS(G)95 should be observed.
The symbol
determines the minimum distance from lighted
objects. The minimum distance between light-output and the
illuminated surface must be more than 0.5m.
User Manual –LS01 Laser
152.738UK
9
8. General maintenance:
Be sure to power off the fixture before conducting maintenance.
To maintain optimum performance and minimize wear, fixtures should be
cleaned frequently. Usage and environment are contributing factors in
determining frequency. As a general rule, fixtures should be cleaned at least
twice a month. Dust build-up reduces can reduce light output & performance
as well as overheating. This can lead to reduced life and increased mechanical
wear.
Unplug fixture from power. Use a vacuum or air compressor and a soft brush
to remove dust collected on external vents and internal components. Clean all
glass when fixture is cold with a mild solution to the cloth or tissue, and drag
dirt and grime to the outside of the lens. Gently polish optical surfaces until
they are free of haze and lint.
The cleaning of internal and external optical lenses and/or mirrors must be
carried out periodically to optimize light output. Cleaning frequently depends
on the environment in which the fixture operates: damp, smoky or
particularly dirty surroundings can require cleaning fluid. Always dry the parts
carefully. Clean the external optics at least every 20 days.
9. Quick trouble shooting :
7.1 If the unit does not function – Check that the main power is on and the
fuse is intact.
7.2 If the unit is not reacting to music – check the unit is in “sound to light”
mode and that the sensitivity control is fully clockwise.
7.3 If the product is not reacting to DMX signals, check the cables and
connections
