background image

Action : 

(

SCENE Review)

Action : 

(

SCENE Review)

2) 

Select a 

SCENE

 

button (1~8) to review.

1)

 Select any one of the 30 banks by pressing the 

     

BANK UP/DOWN

 

buttons.

3)

 

Move wheel  and faders to change fixture attributes.

Notes :

Notes :

Make sure you are still in MANUAL Mode.

3.3 Programming

3.3 Programming

A program (bank) is a sequence of different scenes (or steps) that will be called up one after another.
In the controller  30 programs can be created of 8 scenes in each.

3.3.2CREATE A SCENE :

3.3.2CREATE A SCENE :

1

) Press the 

Program

 

button until the LED blinks.

3.2.2

 

 REVIEW SCENE OR CHASE 

3.2.2

 

 REVIEW SCENE OR CHASE 

Action :

Action :

2)

 you can position 

FADE

 and  

SPEED

 to any place 

     you need to achieve the effect you want to create. 

1

) Press the  

PROGRAM

  

button until the LED blinks.

3)

 

Select the 

SCANNERS

 

you wish to include in your 

     scene.

Notes :

Notes :

Deselect Blackout if LED is lit.

This instruction assumes that you have already recorded scenes and chases on the controller. Other
wise skip section and go to programming.

Action : 

(

CHASE Review

)

Action : 

(

CHASE Review

)

2) 

Press the 

TAP DISPLAY

 

button to view the step 

      number on the display.

1)

 Press any one of the 6 

CHASE

 

buttons.

3)

 

Press the 

BANK UP/DOWN

 

buttons review all scenes 

     in the chase.

3.3.1ENTERING PROGRAM MODE

3.3.1ENTERING PROGRAM MODE

A scene is a static lighting state. Scenes are stored in banks. There are 30 bank memories on the
controller and each bank can hold 8 scene memories. The controller can save 240 scenes total.

4)

 

Compose a look by moving the 

sliders 

and wheel.

5)

 

Tap   

MIDI/ADD

  

button.

6)

 

Choose a

  BANK 

 (01~30) to change if necessary.

7)

 

Select a 

SCENES

 

button to store.

8)

 

Repeat steps 3 through 7 as necessary. 8 scenes 

     can be recorded in a Program.

9)

 

To exit program mode, hold the 

PROGRAM 

button.

You can select more than one fixture.

There are 8 scenes available in every bank.

 

All LEDs will flash to confirm. The LED display will now 

indicate the Scene number and Bank number used.

 

USER MANUAL 

3.2 Operation

3.2 Operation

3.2.1 MANUAL MODE

3.2.1 MANUAL MODE

The manual mode allows direct control of all scanners. You are able to move them and change
attributes by using the channel faders.

Action :

Action :

2)

 

Select a  

SCANNER

  

button.

1

) Press the 

AUTO DEL

 

button repeatedly until the 

     MANUAL LED is lit. 

3)

 

Move  faders to change fixture attributes.

Notes :

Notes :

All changes made while in Manual Mode are
temporary and will not be recorded.

TAPSYNC  DISPLAY

 

button:

Press to toggle the output indicator on the LED display 
between DMX values (0-255) and percentage (0-100)

9/18

                       DMX 512 CONTROLLER SERIES

Содержание DM-X16




















Отзывы: