3.4
Chase Programming
Action :
2)
Adjust the Chase speed by tapping the
TAP DISPLAY
button twice at a rate of your choosing.
1
) Press a
CHASE
button then press the
AUTO DEL
button.
Notes :
The time between 2 taps will set the chase speed (up
to 10 minutes)
3.4.1
CREATE A CHASE
Action :
2)
Press the
CHASE
(1~6) button you wish to program.
1)
Press the
PROGRAM
button until the LED blinks.
3)
Change
BANK
if necessary to locate a scene.
Notes :
3.4.2
RUNNING A CHASE
Action :
2)
Press the desired
CHASE
button.
1
) Press and hold the
PROGRAM
button to enter
programming mode.
3)
Select the
BANK
to be copied using the
BANK UP/DOWN
buttons.
Notes :
4)
Press
MUSIC/BANK COPY
button to prepare copy.
3.4.4
EDIT CHASE (COPY BANK INTO CHASE)
5)
Press
REC
button to copy the bank. All LEDs
will blink.
A chase is created by using previously created scenes. Scenes become steps in a chase and can be
arranged in any order you choose. It is highly recommended that prior to programming chases for the
first time; you delete all chases from memory.
See Delete All Chases
for instructions.
A Chase can contain 240 scenes as steps. The term steps and scenes are used interchangeably.
4)
Select the
SCENE
to insert.
5)
Tap the
REC
button to store.
6)
Repeat steps 3 ~ 5 to add additional steps in the
chase. Up to 240 steps can be recorded.
7)
Press and hold the
PROGRAM
button to save the
chase.
Action :
2)
Select the desired
CHASE
button.
1
) Press and hold the
PROGRAM
button until the LED
is lit.
Notes :
3.4.3
CHECKING A CHASE
3)
Press the
TAP DISPLAY
button to switch the LCD
display to steps.
4)
Review each scene/step individually by using the
BANK UP/DOWN
buttons.
10
DMX 512 CONT R OLLE R S E R IE S
U S E R M A N U A L
