Qtum KDVR 1041, Инструкция по установке и эксплуатации

Страница: 30 / 85

MPEG4-4/8/16Channel - Installation/ Operation Manual
Initialization
All the menu
settings
will be returned to the factory default. To initialize the system, “recording off”
is
required
.
Date Format
Can select among the formats, mm-dd-yyyy / dd-mm-yyyy, yyyy-mm-dd. If date format needs to be
changed, “Recording off” is required.
NOTE
PLAYBACK FOLLOWING TIME CHANGE
The DVR uses the time and date to index video on the hard disk drive so you can find it later.
Changing the time can cause the DVR to work improperly when you try to play back video. If you set
the hour ahead, this is not a problem. But, if you set the hour back, there will be more than one
recording at the same time.
Such as during the October Daylight Saving Time changeover, if you try to search for video between
1 a.m and 2 a.m, the recorder may not operate properly because there will be two hours of recorded
video during this time period. To view video during this overlapping time period, you must start
playback before 1 a.m, then recorder will play both hours between 1 a.m and 2 a.m.
You cannot do a backward search through the overlapping time . But, you can do forward search.
Disk Format
DISK FORMAT
▶
INTERNAL HDD : YES
EXTERNAL DEVICE //
HDD : NOT FOUND
EXECUTE FORMAT
Password is required for Disk to be formatted (default password is “00000000” , which is same
for
“recording off”). Also, Both “recording off” & ‘Playback off ’ are required when you try
to format the HDD.
30/85