Page
10
AN-X-AMXCAPT
January 2008
To configure the AN-X to obtain its IP address from a DHCP server on the network,
select
Obtain an IP address automatically (DHCP)
To configure the AN-X to use a static IP address, select
Use the following Settings
and
enter:
•
the desired IP address for the AN-X.
•
the Subnet mask for the AN-X
•
the default gateway for your network.
You must enter a valid default gateway address even if there is no device at the gateway
address on the network.
Click OK to complete the configuration.
If you Cancel the
Configuration/AN-X IP Settings
command, AN-X is left running the
boot code. Use the
Utilities/Restart AN-X
command to restart the AN-X.
Reconfiguring an AN-X from an Unknown State
It sometimes happens that an AN-X has been previously configured with an IP address
that causes it to be inaccessible on the current Ethernet network. To reconfigure it to a
known state, run the command
Configuration/AN-X IP Settings
to start the AN-X IP
Configuration Wizard and reconfigure AN-X.
