QTS AN-X2-MOD-MON, Руководство пользователя

Страница: 36 / 61

Page
36
AN-X2-MOD-MON May 2016
Offset Description
8 Reserved
9 Reserved
The units for the times are 0.1 milliseconds. A value of 87 means 8.7 ms.
To map the statistics for a given connection, include a line with the keyword ConnStatsn,
where n is the connection number, from 0 to 15, in the input section of a connection.
If you omit the offset, the line must start with a comma.
Examples:
,ConnStats2
40, ConnStats2 ; offset 40
To clear the connection statistics, set bit 0 in word 0 of the output data for connection 15.
This clears the diagnostic counters and the connection statistics.
You can also clear the diagnostic counters and connection statistics separately from the
web interface.
Sending and Retrieving ControlLogix Configurations
To transfer a ControlLogix configuration file to the AN-X2-MOD-MON, first select
Automation Network/ControlLogix Support in the web interface.
Click the Browse button, select the file, then click the Send to AN-X button to transfer the
configuration.
To transfer a configuration from the AN-X2-MOD-MON, first select Automation
Network/View Configuration Files in the web interface.
Right click on AN-X2-MOD-MON ControlLogix Configuration File and select save link
as and save the file on your computer.
Sample Ethernet Configuration File
The following is a file generated by AN-X during an autoconfiguration.
;QTS AN-X2-MOD-MON Auto Configuration Utility
;Copyright (c) 2005 Quest Technical Solutions
;Auto Config Ethernet/IP File - Version 4.2.4
ClxName,AnxModMon
ClxPrefix,MOD_
ClxPrefixOut,MOD_MONOUT_
; ---- Modicon Inputs ----