QTRONIX Snitch Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 8

QTRONIX Snitch Скачать руководство пользователя страница 8

Magnet is mounted on main gate, magnetic pickup can
be inside or outside the motor enclosure.
Proximity type detector shows if the gate is forced open
or left open for longer than two minutes
Main siren sounds for 20 seconds and the built in
transmitter, will send three 1 second transmissions if
the gate is forced open, or left open for longer than 2
minutes. To OVERRIDE THE SIREN on gate left open,
press and hold the remote when opening the gate for
longer than 2 seconds.
Vibration switch and or tamper switch activates the
alarm if motor enclosure or snitch is tampered with.

Trigger input
Existing trigger from receiver and/or intercom is left
connected to the gate electronics and the snitch trigger
connects in parallel, yellow wire, or see EVO diagram.

Power supply
The snitch unit operates on 12v DC, should the voltage
exceed 13.8v DC then the resistor box should be fitted
in series with the supply voltage
The resistor box reduces the greater AC or DC voltage
to the required 12v DC, red = +, black = -

Siren output
A 20 second timed siren output occurs on any alarm
condition
The siren may be silenced before the timeout, simply
press remote to simulate a trigger.

Glossary

«
...
6
7
8

Содержание Snitch









Отзывы:

Нет отзывов