QSW-6300 Series Switches Hardware Installation and Reference Guide
Product Overview
10
1.3.5. LED
LED
Panel
Identification
Status
Meaning
System status
LED
Status
Off
The switch is not powered on.
Blinking
green
(3 Hz)
Initialization is in progress.
Continuous blinking indicates a
fault.
Blinking
green (10
Hz)
It is used for on-site positioning
of the device, and allows
operation and maintenance
personnel to perform remote
power on and off control.
Solid green
The switch is operational.
Solid yellow
Temperature alarm:
1. The temperature of inlet/outlet
vent exceeds the warning
threshold.
2. The power is insufficient for the
system.
Check the working environment of
the switch and power supplies
immediately.
Solid red
3. The
temperature
of
the
inlet/outlet vent exceeds the
warning threshold.
4.
The switch is faulty.
Power supply
status LED
PWR1/PWR2
Off
The power supply module is
not in place or not powered on.
Solid green
The power supply module is
operating normally.
Solid yellow
The power model is identified
but not recognized.
Solid red
The redundant power is faulty
or the AC power cord is not
connected.
MGMT port status
LED
MGMT
Off
The port is not connected.
Solid green
The port is connected at 1000
Mbps.
