QSW-4700 Series Switches Hardware Installation and Reference Guide
INSTALLING THE SWITCH
58
1. Rotate the brackets by 90 degrees and secure the brackets to the switch by using the
screws.
Figure 3-5 Securing Brackets
2. Secure the switch by using the expansion bolts.
Figure 3-6 Securing the Switch
3.3.3. Installing the Switch on a Workbench
In most cases, users do not have a standard 19-inch rack. Therefore, the most popular method
is to place the switch on a clean workbench.
•
Attach the four rubber pads to the four corners on the bottom.
•
Place the switch on the workbench to allow for adequate airflow.
3.4. Installing and Removing a Power Supply Module
Wear an anti-static wrist strap before the following operation.
3.4.1. Installing the AC Power Supply Module
1. Remove the module from its packing materials and make sure the input specifications
meet requirements.
