Installation Manual
6. Router Maintenance
55
www.qtech.ru
Figure 6-4 Pull out the 3ESP card 2
Step 3:
Slide smoothly along the slot guide, pull out the 3ESP card, and place the unloaded
3ESP card on the anti-static mat or in the packaging box.
Figure 6-5 Pull out the 3ESP card 3
Step 4:
Rotate the puller on both sides of the 3ESP card to be installed outwards, then hold
the board with both hands and insert it smoothly along the slot guide rail.
Figure 6-6 Insert 3ESP 1
Step 5:
Close the puller inward, so that the back end of the 3ESP card is in close contact
with the backplane. The following figure is the diagram of installing the 3ESP card:
Figure 6-7 Install the 3ESP card 2
Step 6:
Manually screw in the screws on both sides of the 3ESP card, and then tighten
the screws with a screwdriver to fix the 3ESP card.
