Installation Manual
3. Router Installation
30
www.qtech.ru
3.2.
Ground the Router
For the router and human security, the router must be grounded well. The
resistance between the router chassis and the ground should be less than1
ohm.
Generally, there is the grounding bar on the cabinet and we can connect the ground cable of
the router to the grounding bar.
Please use the ground cable carried by the router.
The steps of installing the ground cable are as follows:
Step 1:
Remove the ground screw on the chassis of the router.
Step 2:
Bind the wiring terminal of the ground cable carried by the router to the ground
screw of the chassis.
Step 3:
Install the ground screw with the ground cable to the grounding hole and
tighten it.
Step 4:
Use the same method to install the other side of the ground cable to the
grounding terminal of the cabinet.
Figure 3-4 Connect the ground cable
