11
Q5000-
Series
In-Line or
Traverse
In-Line
Only
Note 1
UN ECE REG
107,
ISO10542-1
85kg
QRT-Deluxe
In-Line or
Traverse
In-Line
Only
Note 1
UN ECE REG
107,
ISO10542-1
85kg
AL600
In-Line or
Traverse
In-Line or
Traverse
N/A
UN ECE
REG 107
N/A
FLOOR ANCHORAGES
The Q’straint 4-point Wheelchair Securement systems are complete integrated systems, comprising front and rear tiedowns, shoulder
and pelvic restraints and Q’straint floor anchorages.
The table below, shows the recommended combination of Q’straint 4-point tiedown components and Q’straint Floor Anchorages
NOTE 1: Surface Rail may be used in-line orientation for rear tiedowns or traverse for front tiedowns only for M1 vehicles
(ISO10542-1 or Pas 2012-1 compliance). It may be used in either in-line or traverse orientation for M2/M3 vehicle (Reg107
compliance).
NOTE 2: Minimum track length to be 300mm (12”) & 3 fixings.
• Traverse orientation means the track is perpendicular or 90 degrees to the vehicle direction of travel (J).
• In-line orientation means the track is in-line with the direction of travel (I).
REAR TIEDOWNS
Flange
Surface
Oval
Covered
SNC
SNC Mini
Regulation
Tested Wheelchair
Mass
TR
A
CK
NO
TE 2
TABLE 1
M-
Series
In-Line or
Traverse
In-Line
Only
Note 1
N/A
N/A
UN ECE REG
107,
ISO10542-1
85kg
POCKE
TS
QRT-Max
In-Line or
Traverse
In-Line
Only
Note 1
UN ECE REG
107,
ISO10542-1
85kg
QRT-Std.
In-Line or
Traverse
In-Line
Only
Note 1
UN ECE REG
107,
ISO10542-1
85kg
QRT-350e
In-Line or
Traverse
In-Line
Only
Note 1
N/A
N/A
UN ECE REG
107,
ISO10542-1
150kg
QRT-550e
In-Line or
Traverse
In-Line
Only
Note 1
N/A
N/A
UN ECE REG
107,
ISO10542-1
200kg
