17
INQLINE SECUREMENT™ SYSTEM INSTALLATION
8.
Choose a location for the Main Control Box that is easily
accessible but is not located further than the maximum
10 feet Wire Harnesses. Mark, drill and secure in place
by inserting the 4 screws (not included) through the Main
Control Box and washers (not included) (
H
). Clean debris.
Make sure the vehicle is turned off and the vehicle’s battery
is disconnected from the vehicle before starting the
Electrical Connections.
Final image of Wire Harnesses connected to Main Control
Box (H1).
9. Connect the Wall Control Panel Wire Harness to slot J2 on
the Main Control Box (J).
10. Connect the Split Wire Harness to slot J1 on the Main
Control Box. Then connect the Yellow Wire to the Vehicle’s
Interlock System (K). i.e Vechical parking break ground.
Vehicle Battery
Vehicle Interlock
-
+
-
+
Vehicle Battery
Vehicle Interlock
-
+
-
+
H
J
K
J2
Vehicle Battery
Vehicle Interlock
-
+
-
+
Vehicle Battery
Vehicle Interlock
-
+
-
+
J1
Vehicle Interlock
Vehicle Battery
Vehicle Interlock
Vehicle Battery
H1
Final Image of Wire Harnesses Connected to Main Control Box
