22
$PNMRX112, Power Mode Control
This message is used to configure the operating modes of the receiver. Low power modes can
be activated and configured. Low power mode starts to work only after the receiver has a complete
and up to date almanac and it can produce the fix.
Field
Format
Min chars
Max chars
Notes
Message ID
$PNMRX112
6
8
PNMRX112 protocol header.
Operating Mode
Int
1
1
0
= Fully Active
1
= LDCM1
OFF period
Int
1
2
RF off time in seconds [5:10]
Checksum
*xx
(0) 3
3
2 digits.
Message terminator
<CR> <LF>
2
2
ASCII 13, ASCII 10.
Examples:
$PNMRX112,1,5*xx :
enable low power mode (with 5 seconds off time between 2 fixes)
$PNMRX113, GPS Core Activity Control
This message is used to disable GPS Core activities (data extraction and fix generation) on the
node. The goal of this message is to disable these two functions when they need to be overwritten
by external values for test purpose. A reset message must be set after the PNMRX113 in order to
resume operation. For instance if a different almanac needs to be downloaded to the receiver then,
data extraction must be disabled, then the new almanac can be downloaded. A reset command will
then be used to restore operation with hen new almanac.
Field
Format
Min chars
Max chars
Notes
Message ID
$PNMRX113
6
8
PNMRX113 protocol header.
Checksum
*xx
(0) 3
3
2 digits.
Message terminator
<CR> <LF>
2
2
ASCII 13, ASCII 10.
Examples:
$PNMRX113*xx :
Stops GPS Core activities.