Qstarz BT-Q1300S, Быстрое руководство по установке

Страница: 8 / 101

English
……………………………………………………………………………………………………………………………………………………………………………………….
.........................................................................................................................................................................................
8 www.Qstarz.com
H. Navigate as a Bluetooth GPS Receiver with
handheld device
H ‐ 1 Activate the Bluetooth function in your PDA/Smart phone or
PC
Before activating the Bluetooth function in your PDA/PC, please
power on BT ‐ Q1300S to pair and check if your device is equipped
with Bluetooth function. If not, you may need to acquire an optional
CF/SD Bluetooth card or Bluetooth dongle. (The pass code is “0000”)
H ‐ 2 Automatically create a shortcut in Bluetooth Manager
window
After the pairing complete, the system will then find a quick connect
device “Qstarz GPS” in Bluetooth Manager. In further use, you just
need to click it to connect to this Bluetooth GPS Receiver.
H ‐ 3 Check the Serial Port in Bluetooth Setting
After complete pairing with BT ‐ Q1300S, please click “Serial Port” to
confirm the assigned COM port. If you use PDA/PC to pair the GPS
Receiver, please check “Outbound COM port”.
H ‐ 4 Set correct Serial Port in your map software
Activate your navigation software and make sure to select the
correct “Serial Port”.
NOTE 1: In the map software such as TomTom, you might need to
change preference and set “Other Bluetooth GPS” according
to PDA/phone model. In some case please consult map
software company to vary the setting if you have issue on
positioning.
NOTE 2: There might be specific setting requirement per navigation
software. Such as Tomtom, please delete other GPS
settings under Tomtom software, and keep one only.
H ‐ 5 Switch off the Bluetooth function
Switch off GPS function in your PDA/Smart phone/PC, and the