Steam Q1a Operation Manual Rev 4.1.2
19/24
24 August 2006
•
If necessary, set CV 29, bit 5 to ‘1’ (or set CV 29 to 38
45
)
to allow operation with your new Extended Address.
Disable/Enable Verbal Announcements (CV 62)
In Ops Mode, the Quantum System will automatically speak out the value of the CV that you enter.
•
To disable set CV 62 to 0 (no verbal response); to enable set CV 62 to 1 (hear “CV 62 equals 1”). Default is “Enabled”.
CV Inquiry with Verbal Feedback in Ops Mode (CV 64)
46
To inquire about the current value of any CV through Verbal Feedback in Ops Mode:
•
Set CV 64 to the CV you wish to query. Hear the verbal message “CV ‘X’ equals ‘Y’”, where ‘X’ is the CV number and ‘Y’ is the value.
Note: If the CV has a Primary Index such as QSI CV nn.pp (where nn is the CV number and pp is the Primary Index), set CV 49 to pp before you set CV 64 to
nn. For example, if you want to inquire about the Diesel Motor Volume, which is CV 52.10, set CV 49 to 10 and set CV 64 to 52. You will hear, “CV
five two point one zero equals ‘Y’ (where ‘Y’ is the current volume setting). If the CV has both a Primary and Secondary Index, such as CV nn.pp.ss
where ss is the Secondary Index, set CV 50 to ss in addition to setting CV 49 to pp before you set CV 64 to nn. .
Note: If you enter either ‘17’ or ‘18’ in CV 64, you will hear the full one to four digit Extended Address ID number spoken out.
Note: Disabling Verbal Announcements (CV 62) will not disable CV Inquiry (CV 64).
44 If you want to verify your extended address, set CV 64 to 17 (or 18) to hear the full address spoken out.
45 Entering “38” leaves the other configuration settings in CV 29 at factory default, but changes the ID to Extended Address type.
46 This option is not affected by CV 62 (Disable/Enable Verbal Announcements).
