Connecting the Management Port
Connecting the Console Port
1.
Insert the RJ45 connector of the console cable into the RJ45 console port on the front of the switch.
2.
Connect the other end of the console cable to the RS-232 serial port on the computer.
3.
The console port of
S5300-24P4TS
does not support traffic control. Therefore, you must set the option
data traffic control to none when you configure the switch with the super terminal. Otherwise, the single-
pass problem will arise on the super terminal.
Connecting the
SFP
Port
1.
Connect SFP modules through the fiber to other Ethernet terminal devices.
2.
Connect the other end of the cable to the
SFP
port on the front of the switch.
www.qsfptek.com
7
／
11
www.qsfptek.com
V1.0
7
／
11
