9
TD-000485 -01 -A
Connections
Refer to
Figure 5
1. Feed the cables through the opening in the wall/bracket.
2. Connect the LAN-A with PoE RJ-45 connector to the LAN-A/PoE socket
(1)
on the
back of the TSC-7w.
3. Optional – Connect the LAN-B RJ-45 connector to the LAN-B socket
(2)
on the
back of the TSC-7w.
4. If you are using an external power source, connect the barrel connector to the
TSC-7w 12V DC AUX Power input connector
(4)
.
Mount the TSC-7w to the Mounting Bracket
Refer to
Figure 6
1. Align the mounting slots (1) on the TSC-7w with the
mounting hooks (2) and carefully slide the TSC-7w into the
Mounting Bracket. Make sure the cables are not pinched or
stressed.
2. When the TSC-7w is in the mounting bracket, gently press
down to engage the hooks with the slots. Make sure all four
hooks are properly engaged.
3. Secure the TSC-7w to the mounting bracket with two screws
(3).
IMPORTANT!:
Before you can use the
TSC-7w, you must confi gure the Q-Sys design
using Q-Sys Designer. Refer to the Q-Sys
Designer on-line help for details.
— Figure 5 —
+
LAN A/PoE
LAN B
USB
12V DC
RESET
1
2
3
4
— Figure 6 —
1
3
3
2
