QSC SR-800, Руководство пользователя

Страница: 4 / 8

4
TD-001574-01-A1
Yoke Mounting
Refer to Figure 2
Mount the loudspeaker on the wall using the YM-300 yoke bracket. The yoke is sold separately.
Refer to TD-000376 Yoke Mount Bracket User Manual for mounting instructions. The document is
delivered with the brackets.
RPRT!:
If the yoke is not used, be sure the screws on both sides of the enclosure
are installed and tightened into threaded inserts to prevent air leak.
Third-party Brackets
The back panel of the enclosure has four mounting points that conform to the standard 2.75 x 5.0 inch hole mounting
pattern (Figure 3). These mounting points allow you to use a standard 4-hole bracket.
1. Use a Phillips screwdriver to remove four screws (1) lock washers (2) flat washers (3) and the pre-installed
bracket (4) (Figure 4) .
2. Install the third-party mounting bracket (5) according to the manufacturer's instructions (Figure 5).
3. Install the screws (1), lock washer (2), and flat washer (3) removed in step 1.
4. Use a Phillips screwdriver to tighten the hardware.
RPRT!:
Be sure to replace and tighten all hardware into threaded inserts to prevent air leak.
— Figure 2 —
— Figure 3 —
127
mm
5.0
in
69.85 mm
2.75 in
— Figure 4 —
1
2
3
4
— Figure 5 —
1
2
3
5