4
TD-000381-01-C
Installation and Use
Refer to Figure 1
1. Locate installation spot. It must be a structurally capable (1) of supporting at least five times the weight of the
loudspeaker. Refer to the loudspeaker's specification sheet or www.qsc.com for weights.
NIMPARWRRG!:
Open end of wall bracket (4) is to be on the bottom end of the bracket
when mounted.
Make sure there is enough clearance above the wall bracket to install the loudspeaker.
2. Using the bracket as a template, with the open end pointing down, mark the holes you want to use onto the
mounting surface. (2)
3. Select and install the appropriate
mounting hardware (5) (not included).
If you are not sure about the correct
hardware for the mounting surface,
consult a professional engineer.
4. Make sure the bracket is secured to the
mounting surface before attaching the
loudspeaker.
Refer to Figure 2
1. Lower the loudspeaker onto the bracket
making sure both sides of the slot on the
loudspeaker’s bracket fully engages the
wall bracket.
Refer to Figure 3
1. Install the two retaining bolts and tighten
them securely.
— Figure 1 —
2
3
1
4
5
— Figure 2 —
— Figure 3 —
