3
TD-000541 -01-B
Installation
Install the Wall Mount Bracket
Refer to
Figure 3
1. Select location on the wall or other vertical surface where the camera is to be
mounted. Make sure the surface is strong enough to hold the weight of the camera
and bracket.
2. Use the short side (1) of the bracket as a template to mark the location of the four
mounting holes (2) onto the wall.
3. If the camera cables are installed inside the wall, run the cables through the large
hole (3) in the short side of the bracket.
4. Using appropriate screws (4), as necessary (not supplied), attach the bracket to the
wall. Tighten the attaching hardware.
Mount the Camera on the Wall Bracket
Refer to
Figure 4
1. Align hole A on the bottom of the camera with the alignment pin A on the wall bracket.
Place the camera onto the bracket so the alignment pin is inserted into the alignment
hole on the camera and the rubber feet (C) on the bottom of the camera are inserted
into the two slots (C).
2. Install the larger screw (B) up through the wall bracket into the threaded hole on the
bottom of the camera. Use a Phillips screwdriver to loosely tighten the screw.
Refer to
Figure 5
3. Install three smaller screws D, E, and F up through the wall bracket into the bottom of the
camera. Tighten the screws using a Phillips screwdriver.
4. Tighten the larger screw installed earlier.
5. If the camera cables are not installed in the wall, run the cables up through the oval
hole (5) in the longer part of the bracket.
6. Attach the cables to the appropriate connectors on the back of the camera per
installation requirements.
7. Secure the cables to the bracket so that there is no strain placed on the connectors.
— Figure 3 —
3
1
2
(x4)
5
4
(x4)
— Figure 4 —
B
A
A
B
B
C
C
C
C
Bottom plate of Camera
– Camera not shown
— Figure 5 —
D
D
E
E
F
F
Bottom plate of Camera
– Camera not shown
