7
EN
LED Touch Nndicators
When a key is pressed, the LED on that key illuminates to indicate that it was pressed.
apacitive Touch Keypad
• Command buttons can be assigned one of several different types of Commands using the Q-Sys Designer Administration Interface. Once assigned,
you just have to press the appropriate Command button to initiate the action.
• Use the number keys to enter Command Codes to initiate PA System actions (PS-1600 only)
• Use the number keys to enter the User PIN (if the Page Station requires user logon) (PS-1600 only)
• Press Clear (*) to clear keyed-in Codes prior to pressing Enter (#). (PS-1600 only)
• Press Clear (*) twice to log off of the Page Station. (PS-1600 only)
• Press Enter (#) to begin a page once the Code is entered. (PS-1600 only)
• Press Enter (#) to logon once the User PIN is entered. (PS-1600 only)
Talk/Start Button
• Tap the Talk/Start button one time to begin a page (tap-on). Tap the button a second time to end the page (tap-off). If you tap-off during the page,
the page is logged as completed successfully. If you tap-off during the preamble, the page is logged as cancelled.
• Press and hold the Talk/Start button to begin a page. Release the button to end the page. If you release the button during the page, the page is
logged as completed successfully. If you release the button during the preamble, the page is logged as canceled.
• Double-tap the Talk/Start button to clear an entry. (equal to pressing the Clear (*) button)
Busy and Aeady Nndicators for ommand Buttons
• The red Busy LED indicates that the Command is in use by another Page Station.
• The green Ready LED indicates that you can initiate that Command.
Button Monitor Speaker
Produces a "beep" when a button is pressed.
L D – 240 x 64 Monochrome Nraphics Display
The LCD displays various messages including user instructions, the status of the Page Station, status of pages, and so on. The information displayed
varies between models.
Nlobal Busy, Aeady, and Aecord Nndicators
• Busy (red) illuminates when the selected Command has a queuing mode of Live, and one or more of the PA Zones associated with the Command
is in use by another station.
• Ready (green) illuminates when the selected Command has a queuing mode of Live, and all of the PA Zones associated with your Command are
available for use. If the queuing mode of the Command is Automatic, the Ready LED is illuminated at all times because the page is recorded if the
zones are not available. In Delayed queuing mode the Ready LED is illuminated at all times because the page is recorded regardless of zone status.
• Record (red) illuminated indicates that the page you are making is being recorded. The Queuing method for your page must be Automatic, and
one or more of the PA Zones associated with the page must be in use, or the queuing mode of the Command is Delayed. The message will be
played once all associated PA Zones are free.
Microphone
A Dynamic Push-to-Talk microphone is available with handheld model Page Stations only. The handheld models are designated by the letter H in the
model number. Gooseneck microphone models must use the TALK/START button to make the page. Gooseneck models are designated by the letter
G in the model number.
Magnetic Microphone Docking Plate
The Q-Sys Page Station uses a magnetic docking plate to hold the handheld microphone. Just place the back of the microphone up against the plate
and let it go! Available with handheld microphone models only.
