8
Release the Soundbar
To remove the soundbar from the wall bracket, press the Release Latches located on the top or bottom of the bracket, depending on the
orientation (Figure 17).
RIGHT LED
LEFT LED
Tighten the Safety Lock Screws
For safety and security, tighten the Safety Locking Screws on both sides of the wall bracket (Figure 16).
Confirm Connections
1. Once the NL-SB42 is connected to a suitable PoE+ network switch, the RJ45 jack LEDs will indicate network status.
Left LED
Right LED
Yellow
Green
Dark - Disconnected
Dark - Disconnected/10Mbps/100Mbps
Solid - Link
Solid - 1 Gigabit Link
Flashing - Activity
2. For Q-SYS status, check the status LED under the grille (Figure 18).
Identify
Initializing
Fault
NL-SB42
Yellow - Flashing
Blue - Breathing
Red - Breathing
NOTE
: Before you can use the NL-SB42, you must add and configure the soundbar in a design using Q-SYS Designer Software. Refer to
the Q-SYS Help for more information.
LED Light Bar
(under grille)
— Figure 16 —
— Figure 17 —
— Figure 18 —
