EN
4
5
Rack Mounting
The IT-8400 includes several mounting holes for installation into any standard 19
"
rack. Install the IT-8400 in the rack with at least two screws (not
provided) on each side of the panel. The panel includes additional holes to allow it to be mounted at half-rack-space intervals to allow for wire routing
between components. If the rack has rear rails, you may find it more convenient to install the accessory behind the amplifiers to simplify wire routing.
If you are using more than one IT-8400 in the same rack, separate them by at least one rack space to minimize crosstalk.
CAUTION: Turn off the amplifiers before wiring up the accessory.
