2
EN
3
Introduction
The IT-8400 is an output isolation transformer accessory for QSC CX302 amplifiers, allowing up to four amps to drive up to eight 25, 70, and 100 volt
distributed lines. It can be mounted in the same rack as the amplifiers.
Installation
Remove the bags containing the plugs, handles, and handle mounting screws from the carton and set them aside. Remove the IT-8400 from the ship-
ping carton by grabbing the accessory by the extreme ends, and carefully lifting it straight up out of the carton. Place the unit on the floor alongside
the carton and remove the four screws and spacers holding the wood shipping cradle to back of the accessory. Be sure to properly recycle the carton
and the packing materials.
Handles
Install the optional handles to the front of the panel using the screws provided.
