Hardware
• Two independent channels of DSP
• 48 kHz, 24-bit converters
• No turn-on pops or zipper noise
• If the memory or hardware fails, unit turns on muted
• Host interface via RS-232 or QSControl Audio Network System*
via CM16a Amplifier Network Monitor
• Electronically balanced inputs
• Contact closure to trigger preset changes
• Post-DSP output signal for daisy-chaining
• Peak, RMS and Clip meter displays
• DataPort “pass-through”compatible with QSControl
• Selectable input sensitivity: 1.5, 4, 9, 18 Vrms;
6, 14.5, 21.5, 27.5 dBu; 3.5, 12, 19, 25 dBV
Software
• “Drag-and-drop”configuration software
• DSP processing power and memory dynamically assignable to
signal processing functions
• Graphical representation of DSP resources
• Firmware upgrades downloadable via RS-232
• Hard copy printout of configuration description and parameter settings
ADDITIONAL FEATURES
•
Multiple Parametric Filters
, assignable anywhere in the signal chain:
Variable Frequency
Bypass all EQs
Variable Gain
Add EQ
Variable Q
Delete EQ
Apply Bypass
Show Response
•
Multiple Delays
, assignable anywhere in the signal chain
20.83 µsec Incremental
910 msec Maximum
•
Dynamics Processor with Compressor and Expander
, assignable
anywhere in the signal chain:
Gain
Release Time
Threshold
Show Response
Ratio
Bypass
Attack Time
•
Output Peak Limiter,
assignable anywhere in the signal chain:
Gain
Release Time
Threshold
Show Response
Attack Time
Bypass
•
High and Low-Pass Crossover Filters
, assignable anywhere in the
signal chain:
Butterworth 6, 12, 18, 24 dB per octave slope
Bessel 6, 12, 18, 24 dB per octave slope
Linkwitz-Riley 12 and 24 dB per octave slope
Apply Bypass
Delete EQ
Bypass all EQs
Show Response
Add EQ
•
High and Low-Pass Shelf Filter
,assignable anywhere in the signal chain:
Variable Corner Frequency
Bypass all EQs
Variable Gain
Add EQ
Variable Q
Delete EQ
Apply Bypass
Show Response
•
Signal Mute
•
Attenuation:
0.1 dB steps
•
Mix Post Crossover Audio
(2
➜
1 Mixer)
•
Signal Splitter
•
Built-in Noise Generator
(Pink & White)
•
Built-in Variable Frequency Tone Generator
•
Signal Polarity Reversal
•
Frequency Response
readout after each filter
•
Clip and Protect Indication
at any point in the signal chain
SIGNAL PROCESSING FUNCTIONS
* Available in early 2001.
