21
TD-000434 -01 -B
HOME > OUTPUTS > SPKR PROC > CROSSOVER > GAIN/POL > GAIN (ENTER)
Step 2 —
Set the Crossover Gain and Polarity
Gain
-5.5 dB
Gn/Pol
F1: A B C D
Polarity
POL +
Output
A
20 dB
-60 dB
Scroll to select (Gain or Polarity)
To edit, press
Turn to adjust parameter
To confi rm, press
To exit, press
ENTER
ENTER
EXIT
+
Gain –100 to +20 dB
–
Po or –
EQ
HOME > OUTPUTS > SPKR PROC > EQ > BAND 1, 2, 3, 4, or 5 (ENTER)
The graph is a composite of all fi ve bands. Each band has a full range of 20 Hz to 20 kHz.
Step 1 —
Set the EQ
Type
Parametrc
Band 1
F1: A B C D
Gain
-35 dB
Output
A
20 dB
-60 dB
Freq
100
BW
.01
Scroll to select
(Type, Gain, Freq, BW)
To edit, press
Turn to adjust parameter
To confi rm, press
To exit, press
ENTER
ENTER
EXIT
Type: Bypass, Parametric, Low Shelf,
High Shelf (Default Bypass)
Gain: -40 to +20 dB (Default 0.00)
Freq: 20 to 20kHz (Band 1 Def 100 Hz)
(Band 2 Def 500 Hz)
(Band 3 Def 1 kHz)
(Band 4 Def 2.5 kHz)
(Band 5 Def 5 kHz)
BW: 0.01 to 3.00 Octive
(Default 1.00 Oct.)
Delay
HOME > OUTPUTS > SPKR PROC > DELAY (ENTER)
Distance measurements are based on the speed of sound being 340 meters/second, or 2.94 milliseconds/meter.
Step 1 —
Set the Output Delay Time
F1: A B C D
Outputs > Spkr Proc > Delay
Output
A
Delay
State
Bypass
Time (ms)
10.0
Distance
3.4 meters
11.3 feet
Delay:
0.0 ms to
75.00 ms
0.021 to 1.0 ms increments
State:
Bypass or
On
Scroll to (Delay Time or Bypass)
To edit, press
Turn to adjust parameter
To confi rm, press
To exit, press
ENTER
ENTER
EXIT
Limiter
NOTE:
If you select a QSC Loudspeaker, you will see that the limiter is LOCKED. QSC has given these loudspeakers specifi c limiter
settings tailored for that loudspeaker that should not be changed. If there is a limiter applied in these voicings, you will be able to see the
applied limiter on the graph.
