6
DCP 300 Rear Panel Features
10.
Mono analog input – accepts microphone or line level signals (w/ phantom power)
11.
Stereo analog inputs – accepts line level signals
12.
Analog audio inputs – connect to D-Cinema server or film processor with analog outputs
Top connector: channels 1 through 8
Bottom connector: 8 auxiliary channels
13.
Digital audio inputs – connect to D-Cinema server or film processor with digital outputs
Top connector: AES3 pairs 1 through 4 (digital audio channels 1 through
8)
Bottom connector: AES3 pairs 5 through 8 (digital audio channels 9 through 16)
14.
S/PDIF input – multi-channel digital input for non-synch/alternative content
15.
USB slave/client port for DCP 300 configuration and management via direct connection
16.
10/100 Mbps Ethernet port – for QSControl management and remote access
17.
100 Mbps Ethernet ports – CobraNet audio network - Primary and Secondary (backup)
18.
SD memory card – device configuration storage
19.
Serial communications port – 3
rd
party control/automation via RS232
20.
IEC inlet – AC mains power connector with cord lock
21.
Dataport interface for QSC amplifiers – fourteen connectors (up to 28 channel outputs)
22.
Hearing impaired and visually impaired special mix outputs
23.
TTL logic outputs – for use as automation triggers, alerts, system status flags etc.
24.
Automation inputs – digitally sampled analog control inputs (control presets, levels etc.)
25.
Relay outputs – mechanically decoupled control outputs (curtain, lighting control etc.)
26.
Audio monitor output – line level tap from front panel monitor speaker (post DSP, pre
amplifier)
