5
the DCP 300 detects all amplifier clipping, protect modes
and heat sink temperature for reporting via a QSControl
Ethernet monitoring system. The QSControl.net suite of
applications allows for the creation of custom control
screens via “drag and drop” design using the QSCreator
software application.
Screens can be designed to provide intuitive fault reporting and
diagnosis that is accessible through remote network access. In
addition, QSC’s PoE enabled NAC 100 Ethernet remote control
panel provides remote operation and status throughout a
cinema multiplex from anywhere on the local network.
DCP 300 Front Panel Features
1.
Power “on” switch
2.
Monitor volume and parameter adjust
(this control has two modes of operation)
Speaker mode: controls level to DCP 300 front panel speaker in monitor mode
Setup mode: provides parameter control and LCD navigation in setup mode
3.
Touch control LCD (4.3” 16:9 color display)
4.
Power “on” LED – illuminates green when AC power is applied
5.
Fault LED – illuminates red when load faults or system errors are detected
6.
4” full range monitor speaker
7.
Setup mode LED – illuminates green when DCP 300 is in setup mode
8.
Mute button – illuminates red when engaged, illuminate
s
green during normal
operation
9. Auditorium volume control – global level control for all Dataport outputs
