background image

 

1

 

IMPORTANT SAFETY PRECAUTIONS & EXPLANATION OF SYMBOLS    

 
 
 

 
 

 

 
 
 

 
 

 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

 

 
 
 

The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the 
user to the presence of uninsulated “dangerous” voltage within the product’s enclosure that 
may be of sufficient magnitude to constitute a risk of electric shock to humans.   
 
 
The exclamation point within an equilateral triangle is intended to alert the user to the 
presence of important operating and maintenance (servicing) instructions in this manual.    
 
 
 
 
 

SAFEGUARDS 

Electrical energy can perform many useful functions. This unit has been engineered and 
manufactured to assure your personal safety. Improper use can result in potential electrical 
shock of fire hazards. In order not to defeat the safeguards, observe the following instructions 
for its installation, use and servicing.  
 
 
Caution: To reduce the risk of electric shock, do not remove the cover. No user-serviceable 
parts inside. Refer servicing to qualified service personnel.  
 
 
 
Warning: To prevent fire or electric shock, do not expose this equipment to rain or moisture. 
 
 
 
 
1 –  Maximum operating ambient temperature is 50°C (122°F).  
2 –  Never restrict airflow through the device vents. Please insure that the side panel vents are  
       unobstructed.  
3 –  When installing equipment into rack, distribute the units evenly. Otherwise, hazardous     
       conditions  
       could be created by an uneven weight distribution.  
4 –  Connect the unit only to a properly rated supply circuit. The DCP 300 is suitable for  
       connection to    
       100-240VAC, 50-60Hz with no special considerations other than the appropriate IEC power 
       cord.  
5 –  Reliable Earthing (grounding) of rack-mounted equipment should be maintained.  
 
 
 

LITHIUM BATTERY WARNING 

THE DCP 300 EQUIPMENT CONTAINS A NON-RECHARGEAB

L

E LITHIUM BATTERY. 

LITHIUM IS A CHEMICAL KNOWN TO THE STATE OF CALIFIRNIA TO CUASE CANCER OR 
BIRTH DEFECTS. THE NON-RECHARGEABLE LITHIUM BATTERY CONTAINED IN THIS 
EQUIPMENT MAY EXPLODE IF IT IS EXPOSED TO FIRE OR EXTREME HEAT. DO NOT SHORT 
CIRCUIT THE BATTERY. DO NOT ATTEMPT TO RECHARGE THE NON-RECHARGEABLE 
LITHIUM BATTERY.  

 
 

 

 

Содержание DCP 300 User m

















Отзывы: