7
TD-000437-00-B
Output Nains Screen
The Output Gains screen provides a quick overview of all outputs. Adjust output gains here.
To access this screen, use the NEXT or PREV buttons or press one or more of the SEL buttons.
Then adjust gain for the selected channels. If you press one or more of the SEL buttons but do
not make any gain adjustments, this screen will remain visible for a short time but then return
to the previous screen.
1. The highlighted background indicates the channel selected.
2. The channels are displayed according to the configuration of the amplifier.
3. The output gain is controlled by the GAIN knob on the amplifier or by the Gain control in
the CXD-Q Output component in the Q-SYS design.
4. The level of the Q-LAN digital audio stream applied to the channel, referenced to digital
full-scale.
5. The output voltage of the channel or group of channels.
6. In this example, channels A and B are parallel, while C and D are separate.
— Figure 18 —
OUTPUT GAINS
Q-LAN:
-8.08 dB
VOLTS:
101 V
C
-100.0 dB
.014 V
Q-LAN:
VOLTS:
D
-100 dB
.014 V
Q-LAN:
VOLTS:
-45.0 dB
-45.0 dB
-45.0 dB
AB
4
5
2
3
1
6
