7
Example #2 - CobraNet X-over mode:
This is the simplest connection you can make between two BASIS boxes. You use a CAT-5 crossover cable connected between the
CobraNet ports of each unit. No network switch is required. This connection allows audio to pass between the two BASIS boxes over
CobraNet.
Combining example 1 and 2 lets you setup and monitor one box at a time, much as you would have to do using a point-to-point RS232
connection, while passing audio between them, all without a network switch. However, you would have to physically connect your
computer first to one BASIS box and then to the other. With this elementary connection you don't have a true network. It is like mak-
ing RS-232 connections - except that performance is better.
All the other examples are of proper networks and all require a network switch. On a proper network, you have direct access to all
units all of the time without having to physically switch between them. You still get the great performance of TCP/IP over Ethernet.
(And we believe QSC's advanced 4th generation networking software provides the best performance of any networked audio control
system available today including Ethernet based systems from competitors.)