15
3.
Install a SFF tray into the system.
①
Insert the loaded drive tray into the empty drive bay all the way to the back until you
hear a “click” sound.
3.2.
Upgrade Memory
CAUTION:
The following instructions should only be performed by an authorized
and trained technician. Strictly adhere to the instructions to install a
RAM module on the NAS.
Before you start, please ensure that you turn off the NAS, disconnect
the power adapter, network cable(s), and also remove any other
device/cable that is attached to the NAS.
XN5008R is installed with two 4GB DDR4 memory module by default. If you want to install,
check, or remove a memory module on your XCubeNAS, please follow the steps as
illustrated below:
1.
Shutdown your XCubeNAS and disconnect power adapter, network cable(s) or any other
device/cable that is attached to your system to prevent any possible damages.
2.
Remove the rear top cover.
①
Loosen the screw on the back of the XCubeNAS.
②
Pull the rear top cover, and put it aside.
