Prepare for Installation
9
2.
Prepare for Installation
Preparation for installation is an important task, it will help you to plan your system
configuration and install your system smoothly. This chapter provides a description of the
configuration planning steps and a configuration worksheet example for reference.
2.1.
Prepare for Configuration Planning
Before installing your SAN storage system, it is highly recommended you to do installation
preparation using the worksheet. Sticking to the worksheet will help you to setup and
initialize the storage system. Please refer to the Table 2-1 for the content of worksheet. You
can download this worksheet here:
XCubeSAN Configuration Worksheet
Table 2-1
Configuration Worksheet
1. Initial Configuration
Item
Value
System Name:
The maximum length of the system name is 32 characters.
Valid characters are [ A~Z | a~z | 0~9 | -_ ].
Admin Password:
The maximum length of the password is 12 characters.
Valid characters are [ A~Z | a~z | 0~9 | ~!@#$%^&*_-
+=`|\(){}[]:;”’<>,.?/ ].
NTP Server:
FQDN (Fully Qualified Domain Name)or IP address of NTP
(Network Time Protocol) server.
Time Zone:
Depending on your location.
2. Management Port Setting
Item
Value
Management Port IP Address on Controller 1:
IP address, subnet mask, and gateway of the management
port on controller 1.
IP:
SM:
GW:
DNS Server Address:
IP address of DNS (Domain Name System) server.
Содержание XCubeSAN XS5224D
