Qsan XCubeSAN XS5224D, Руководство владельца оборудования

Страница: 79 / 134

Installing the System Hardware
61
 Supported types  UPS via SNMP, Serial UPS with COM port, and USB UPS.

Communication types

network UPS via SNMP, Serial UPS with COM port, and USB
UPS. Serial communication is the only supported type.

Connect the UPS to the XCubeSAN.
The following image is the location for the UPS connection.
Figure 3-36 Location for the UPS System Connection
The table below shows the available UPS cable, model name, and its description.
Table 3-14 Available UPS Cable for XCubeSAN Series
Model Name Picture Description Applied Models
CBL-UPS UPS Cable, Phone-jack, 1
Meter XS5200 Series
XS3200 Series
For checking the UPS connection and status, please refer to the chapter 6.3.3, UPS Settings
and Status in the
XCubeSAN SANOS 4.0 User’s Manual .
3.13. Connecting the Optional USB LCM
If you purchased the USB LCM, please use the enclosed USB extension cable (A-male to A-
female) to c
onnect to the system . The Following procedures are for the USB LCM
connection:
 Connect the USB LCM to the female side of the USB extension cable.

Connect the male side of the USB extension cable to the USB port on the system front
pillar.