Qsan XCubeNAS XN5004T, Руководство пользователя

Страница: 22 / 49

16
© Copyright 2017 QSAN Technology, Inc. All Right Reserved.
3.2. Upgrade Memory
CAUTION:

The following instructions should only be performed by an authorized
and trained technician. Strictly adhere to the instructions to install a
RAM module on the NAS.

Before you start, please ensure that you turn off the NAS, disconnect
the power adapter, network cable(s), and also remove any other
device/cable that is attached to the NAS.
XN5004T is installed with two 4GB DDR4 memory module by default, dual channel
performance is also supported. In order to achieve dual-channel RAM performance, it is
suggested that you install memory modules with the same capacity in pairs. If you want to
expand the memory capacity, please follow the steps as illustrated below:
1. Shutdown your XCubeNAS and disconnect power adapter, network cable(s) or any other
device/cable that is attached to your system to prevent any possible damages.
2. Use the key provided in the accessory box to press the door button and remove the
service door.
3. Remove existing memory module(s).
① Push the retaining clips on each side of the slot, the existing memory module will
pop out from the slot.
② Take out the memory module.