28
© Copyright 2017 QSAN Technology, Inc. All Right Reserved.
4.
Use two M5 screws to fasten the bracket to the rail kit, one on each rail. (For the
complete safety, you can use four optional M4 screws to fasten the bracket to the rail
kit.)
5.
Insert the chassis to complete the installation.
①
Pull the middle member fully extended in locked position.
②
Ensure ball bearing retainer is located at the front of the middle member.
③
Insert chassis into the middle-outer member.
④
When hitting the stop, pull/push release tab to unlock and retract chassis into rack.
⑤
Pull the chassis into position and ensure the chassis ear is located on the chassis.
(The chassis ear allows you to drag out the chassis from its position without any
screws.)
