Qsan Technology XCubeSAN XS5224D, Руководство по оборудованию

Страница: 118 / 143

98 ©
Copyright 2021 QSAN Technology, Inc. All Right Reserved.
 Use one hand to hold one end of the controller module (the side with release levers) and
the other hand hold the bottom of the controller; pull out the controller module until it is
free from the system chassis.
Figure 6-4 Procedures of Removing the Controller Module
Installing the Controller Module
The following content and images are the detail steps of installing the controller module
into the system chassis.
 Make sure the position of both release levers of the controller is at downward.

Align and place the controller to the empty controller slot.
 Push the controller module all the way into the controller slot until the position of two
release levers move upward automatically.
 Pull up both release leavers at the same time until they totally parallel with the controller
cage and then use a Phillips screw driver to tighten both screws.