QRP Labs QCX 5W CW Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 138

background image

QCX assembly Rev 1.08

83

If the weight is increased from the default 50.0%, then the key-

down “dit” is made longer. A “dah”

is lengthened by the SAME amount. The corresponding inter-symbol (or character, or word) gap is
shortened by the same amount. The additional time spent on the key-down is therefore taken from
the key-up period. The keyer speed is unchanged by altering the weight parameter.

As an example: suppose you want to make your Morse sound “harder” by shortening the dits and
dahs. You could set the parameter to 450, which means 45.0%.

The parameter range is 050 to 950 (5% to 95%) though you would not normally ever need to go
anywhere near these unreasonable limits. In the event that you enter a value outside this range,
the firmware automatically applies these limits to the actually used parameter.

4.5 Auto Space

OFF

Auto-spacing means that the pause between CW characters is forced to be 3 dit lengths (more or
less, if you have CW weighting configured, see above).

The majority of keyers do not implement auto-spacing. You use the paddle to send your dits and
dahs making up the Morse character you wish to send. As soon as you next press the paddle, the
next character is started. The keyer forces correct 1:3 ratio of dits and dahs and inter-symbol
spacing, but it does not force you to wait for the correct duration of 3 dits between transmitted
characters.

Some keyers do implement automatic character spacing, such as the old (1973) Accu-Keyer
design by James WB4VVF see

https://inza.files.wordpress.com/2011/01/accu-keyer.pdf

.

This configuration therefore allows you to switch on automatic character spacing if you wish. In
this case, if you press a paddle too SOON, before the 3 dit durations have elapsed after the last
character completed, the keyer will wait until the correct time to start the next character.

In the even that you press the paddle too LATE, there is nothing the keyer can do to travel back in
time and force it to 3 dit lengths for you. You might have intended an inter-word space, for
example. So pressing the paddle too late cannot be corrected.

4.6 QSK

Full

This setting defines the break-in (QSK) behaviour of the radio. Two settings are possible:

Full

: after the delay time for RF envelope shaping, the Tr

ansmit/Receive switch is set to “Receive”

shortly after key-up. In this way, you will hear the other station (or any QRM, QRN etc) transmitting
in between the dits and dahs of your own transmissions. Many experienced operators like to be
able to have a feel for what is happening on the band, in between their key-downs. In some ways
you feel like you are listening to your own sidetone audio as just another signal on the band, and
you can still hear other signals too.

«
...
81
82
83
84
85
...
»

Содержание QCX 5W CW











































































































































Отзывы:

Нет отзывов

Похожие инструкции для QCX 5W CW

Бренд: INSTROTECH Страницы: 58

Бренд: Balluff Страницы: 62

Бренд: Balluff Страницы: 105

DigitalFlow XGF868i

Бренд: Panametrics Страницы: 72

DigitalFlow XGF868i

Бренд: Panametrics Страницы: 90

Бренд: Sangean Страницы: 1

Discovery Series

Бренд: Hall Technologies Страницы: 13

Бренд: Qixiang Electron Science & Technology Страницы: 45

Бренд: Transition Networks Страницы: 1

Бренд: Silent Call Communications Страницы: 8

Бренд: Omega Страницы: 4

TURK TRAKTOR MP228 BT

Бренд: DAIICHI Страницы: 34

UltraTech IC-F4GT-4

Бренд: Icom Страницы: 17

Бренд: GbSat Страницы: 52

Бренд: Barksdale Страницы: 2

Бренд: Pulsar Страницы: 5

Бренд: Yaesu Страницы: 20

Бренд: Avermedia Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды