QPS Que!, Быстрое руководство по установке

Страница: 8 / 16

Step 6. Set the Master/Slave jumper as appropriate for your system. When connecting
a second IDE device to the same IDE interface connector cable you should
designate the first device as the Master and the second device as the Slave.
This is done by placing the jumpers over the corresponding pins on the back
of your DVDBurner drive.
Note: The location of jumpers may vary from one model to another.
Note: Please refer to Que! DVDBurner Installation Manual CD for complete installation version.
6
IDE INSTA L L AT I O N