QPS Que!, Быстрое руководство по установке

Страница: 10 / 16

Step 10. If you wish to have the audio output of your Que! Drive connected to your
sound card, simply connect one end of the audio cable provided with the
Que! Drive kit to the audio out connector on the back of the Que! Drive and
the other end to the audio input connector on the sound card. If the audio
cable is not keyed make sure that the red wire lines up with the pin labeled
"R". If you do not see a connector that matches the audio cable that has been
provided in this kit, you may need to purchase a special connector for your
sound card.
Step 11. Line up the front bezel of your QPS drive with the front panel of your system
and then tighten the mounting screws.
Step 12. Replace your computer’s cover.
Step 13. Power up your computer.
Step 14. Proceed to the software installation section.
N o t e : Please refer to Que! Internal DVDBurner Installation Manual CD for complete installation version.
8
IDE INSTA L L AT I O N