QPS Que! Combo FireWire, Руководство по установке, Страница: 33 / 64

29
I N STA L L AT I O N
Step 8: At the “Driver Found” dialog box, click on “Next”. (If Windows 98
SE prompts for Windows 98 SE CD again type in: D:\win98 and
click on “OK”. Assuming D is the CD-ROM drive letter.)
Step 9: Click on “Next ” then “Finish” and restart the system for the driver
to take effect.
To verify successful driver installation:
Step 1: From the main desktop, double-click on My Computer, Control
Panel, System, then click Device Manager tab.
Step 2: Double-click on 1394 Bus Controller device option. “PCI OHCI
Compliant IEEE 1394 Host Controller” should be displayed when
the driver is successfully installed. The ports are now ready to
connect devices.
For Windows 2000
Step 6: Once the PC boots, you will be prompted with the “Found New
Hardware” Wizard dialog box and OHCI Compliant IEEE 1394 Host
Controller will be identified. At the “Found New Hardware” Wizard
window, click on “Next”.
Step 7: Insert Windows 2000 CD-ROM into the CD-ROM drive. “At the
Install Hardware Device Drivers” dialog box, click “Next”.
Step 8: Once “Locate Driver Files” dialog box appears, check the CD-ROM
option then click on “Next”.
Step 9: At the “Driver File Search Results” dialog box, click on “Next”. Click
on “Finish” and restart the system for the driver to take effect.
To verify successful driver installation:
Step 1: From the main desktop, double-click on My Computer, Control
Panel, System, then click on Hard w a re tab, then Device Manager button.
Step 2: Double-click on 1394 Bus Controller device option. “PCI OHCI
Compliant IEEE 1394 Host Controller” should be displayed when
the driver is successfully installed. The ports are now ready to
connect devices.