QPR 6690 10 Gallon Melter Applicator
ASSEMBLY INSTRUCTIONS
9 of 18
7322 Bonnyshire Drive
Chattanooga, TN 37416
September 2015
Step 4B)
Align and attach shoe assemble to valve assembly
*Attach shoe to bottom of the tank using the the bolts.
*Do not fully tighten the two tank bolts until assembly is completely aligned.
*Align shoe assembly with the slot on the valve assembly post.
*Correct alignment will have the bolt and washer in full contact with
the slot plate for firm and secure contact.
*If the slot and bolt do not align correctly: screw in or screw out the valve
assembly until it is correctly aligned.
Alignment bolt for
aYachment to the
slot on the valve
assembly post.
